Yiguang Technology

PLY240W Series, PC&NFC Programming, Flicker-Free, Deep Dimming

1. Drive Mode: Constant Current

2. Technology: PFC + LCC

3. Output Power: 240W Max.

4. Input Voltage: 100 to 277VAC，47-63HZ

5. Number of Outputs: One

6. Output Voltages: 10 ~ 450Vdc

7. Output Currents: 200mA - 6000mA

8. Safety: UL8750, UL1310 Class 2, CSA22.2, EN61347. Safety isolation between primary and secondary

9. EMC: EN55015, FCC 47CFR Part 15 Class B

a. Comply with UL, ENEC, CB & CE

b. RoHs compliant;

c. Metal Shell, Silicone Potting, Up to 120°C;

d. Compact, Lightweight Design;

e. Water Resistant and Dust Proof Design: IP67, NEMA4, 

    for Dry, Damp, Wet Locations;

f. Small electrical box for installation;

g. Active Power Factor Correction technology to reduce 

   power consumption;

h. Safety Isolation between Primary and Secondary.  

i. Surge Immunity ( Lightning Protection ): 

    Comply with EN61000-4-5, line to line 6KV/3KA 8/20 uS, line to earth (PG) 10KV/12ohm 8/20 uS. Eliminates circuit breaker tripping, switch arcing and relay failure.

1. Operating Temperature: −40 to +50°C;

2. Storage Temperature: −40 to +85°C;

3. Humidity (non-condensing): 5% to 95%RH;

4. Cooling: Convection;

5. Vibration Frequency: 5 ~ 55HZ/2g, 30 minutes;

6. Impact Resistance: 1g/S;

7. MTBF Tc @75°C: 410,000 hours @ 100% Load per MIL-HDBK-217F.;

8. LIFE Tc @75°C: 50,000 hours @ 100% Load per MIL- HDBK-217F.;

9. Safety: UL8750, CAN/CSA C22.2 No.250.13, US & CN LED Driver Class 2, UL Class P.

EN61347-1:2007+A1:2010+A2:2012, EN61347-2-13:2014, EN62493:15

a. Maximum Input Current: 0.78A (@ 120V/60Hz, full load);

b. Inrush Current (Peak): <15A/ 3mS (230V/ 50Hz, full load);

c. Constant Current Regulation: ±3%, Over Input Line Variation;

d. Load Regulation Accuracy: ±4%;

e. Output Current Ripple: <1%*Io

f. Leakage Current: 400uA typical; Hold up time: half cycle;

g. Protection: Output over-voltage protection;

Output over-current protection;

Output short circuit, auto-recovery;

Lighting & transient protection built in.