Yiguang Technology

PLD45W series, programmable, 0-10V dimming, NTC control

1. Drive mode: flicker-free constant current drive, primary and secondary isolation type

2. 0-10V linear dimming, dimming ratio 20:1

3. Technology type: PFC+PWM dual-stage Flyback technology

4. Output power: 45W

5. Input voltage: 120~277VAC, 47-63HZ

6. Output: 19~56Vdc/100-800mA programmable setting

7. Comply with UL, PSE, CE, CCC safety certification:

North American safety standards: UL8750, CSA C22.2, LED Driver Class A

European safety standards: EN61347-1:2008, EN61347-2-13:2006

Japanese safety standards: J61347-1 (H20), J61347-2-13 (H21)

Chinese safety standards: GB19510.1-2009, GB19510.14-2009

North American EMC standards: FCC 47CFR Part 15 Class B

European EMC standards: EN55015, EN61000-3-2, EN61000-3-3

Japanese EMC standards: J55015 (H20)

Chinese EMC standards: GB17743-2007, GB17625.1-2003

8. Meet RoHs standards and meet IP20 waterproof rating;

9. 94V-0 150°C thermal conductive silicone partial potting, 120°C plastic shell;

a. Suitable for use in indoor environments and in high humidity and high dust environments;

b. Use active PFC (power factor correction) technology to reduce product power consumption;

c. Surge protection: Meet EN614000-4-5, 2KV/4KV, 8/20usec transient protection;

1. Operating temperature: Tc 80°C (max), reference Ta −40°~ 55°C;

2. Storage temperature: −40°~ +85°C;

3. Humidity (non-condensing): 5% ~ 95%RH;

4. Product cooling method: natural cooling;

5. Vibration resistance: 5 ~ 55HZ/2g 30 minutes;

6. Shock resistance: 1g/S;

7. MTBF: 332,000 hours, at full load and Tc 70°C;

8. LIFE: 50,000 hours, at full load and Tc 70°C;

9. Maximum input current: 0.40A (@120V, full load);

a. Input surge current: <40A (25°C, 230V, cold start);

b. Current constant current accuracy: ±5%, load adjustment accuracy: ±3% ;

c. Dimming input: 0-10V/2mA;

d. Dimming output range: 5-100%;

e. Standby power consumption: 0.4W@120V, 0.8W@230V, 1.0W@277V

f. Output current ripple: <±4% @ CCR load; <±4% @ LED load;

g. Programmable: set output current through REST;

h. NTC control: sense LED temperature through NTC thermistor to control LED current;

i. Leakage current: 300uA (typical value);

j. Protection: output overvoltage protection, output overcurrent protection, output short circuit protection,

can be restored automatically after cancellation.